Operation Manual

20
Download Scansonic Via App Store:
Note: the first generation of iPod Touch/iPhone is not compatible with App.
Using the Wireless Device Remote Control
application, you can control Scansonic radio
from iPod Touch/iPhone/iPad.
1. In your iPod Touch/ iPhone/iPad’s main menu,
open the App Store by clicking the App store
icon, as the photo at right side:
2. In the App store, search for ‘Scansonic’.
3. Touch ‘Scansonic’ icon, and then hit the "free" button, it will then change the "free" to
"install". Click again to install. You will be invited to enter your user name and password. You shall
only have to enter your username once and then your iPod Touch/iPhone/iPad will remember it, but
you will need to always enter a password to prevent just anyone from downloading apps to your
equipment.
4. Once your iPod Touch/iPhone/iPad has started downloading the app, a status bar will show up to
indicate how long it will take to download. Once it completes, you can access your Scansonic radio
anytime via a simply touch .
Play Your Radio Via Apps:
Note: Please set your iPod Touch/iPhone/iPad to use the same network access point as the Scansonic
radio.
1. For initial use, touch your radio icon , your device pop-up a dialog box invites you input ‘Net
Remote Pin code’, the default code is 1234, you can give a user-defined code via you radio: press
MENU  < Main menu >  < System settings > 

 < Network > 

 < Netremote PIN setup >.
2. Want to keep your App works while your radio under standby mode? It needs set to ‘yes’ for Keep
network connected. The path is:
Press MENU  < Main menu >  < System settings > 

 < Network > 

 < Keep network
connected > 

 Yes, press SELECT to confirm.