Operation Manual

12
Shift to wired network
Step 1 – Choose LAN Setting
 Note: a. Ensure LAN cable connecting to LAN socket already.
1. To access to this order, press MENU  < System settings > < Network >, press SELECT to
confirm.
2. Turn SELECT to < Manual settings >, press SELECT to confirm.
3. While cursor point to < Wired >, press SELECT to confirm.
4. While cursor point to < DHCP enable >, press SELECT to confirm. After a while, the Ethernet
connection would be done.
☺ If the connection is failed, please follow:
a. Check your Router, see it working normally or not.
b. Check your LAN cable, make sure it hasn’t damaged,
c. See the port of cable which inserting LAN socket is fine.
Shift to Wireless Network
1. Refer step1-3 of above ‘choose LAN setting’, and then turn SELECT to < Wireless >, press
SELECT to confirm.
2. While cursor point to < DHCP enable >, press SELECT to confirm, and then step by step to enter
wireless network.
☺ Now, setting to wireless is OK!