I n s t r u c t i o n M a n FM/Internet u a l Radio
Safety Information 9. Do not defeat the safety purpose of the polarized or grounding - type plug. a polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Contents Safety Information 2 Package Content 2 Internet Radio Quick start Guide 3 What you need before you can use your Internet Radio ......................................................3 Unit Front Overview ............................................................................................................4 Unit Back Overview ............................................................................................................5 Setup Wizard ..........................................
Package Content Main Unit Adapter Instruction Manual 2
Internet Radio Quick start Guide What you need before you can use your Internet Radio Thanks for your buying! Before use it, you need to know followings: LAN Setting: Make sure the internet environment is ready and the network settings is available for LAN (ADSL or Cable Modems is highly recommended). Wireless LAN Setting: • A broadband Internet connection. • A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
Unit Front Overview Control STANDBY/ON Internet radio FM Music Player AUX IN mode Press to turn on/off unit (When alarm is coming, press to turn alarm off.) MODE Press to switch among Internet Radio, Music Player, FM Mode and Auxiliary Input.
Unit Back Overview Setup Wizard Step 1 - Power up 1. Connect to your Internet Radio adapter and ensure the power LED is lighting up, extend antenna. 2. In use, it can be switched on or off by pressing STANDBY/ON. For initial use, it will ask you to ‘Setup wizard’. Step 2 – Setup wizard 1. Continue the above step, press SELECT (the SELECT knob) to confirm ‘YES’, and then turn SELECT to your preferred ‘hour format’, press SELECT to confirm.
Press SELECT to confirm ‘Update from Network’. Now, follow your radio’s instruction, configure the following parameters: 2. Timezone: select your local timezone. Daylight saving: On or Off as per your country status. Wlan region: Most of Europe/USA/Canada/Spain etc. SSID: In some cases, radio may find more than one network. Turn SELECT to your favorite one, press SELECT to confirm.
Access Wireless Network 1. Continue above step as previous page, press SELECT to enter ‘Internet radio’ mode. Or press MENU or BACK to Main menu page. 2. While cursor point to < Station list >, press SELECT to confirm. 3. Then refer following section to choose stations. If fail to connect to network, please follow: a. Check your Router, see it working normally or not; b. Relocating your radio to a stronger signal position is necessary! c. Make sure your password is input correctly.
2. There are five options available for you to choose a station as above photo. ‘LOCATION’ enables you to choose from the radio stations provided by any country which you choose from a list. a. While cursor point to < Location >, press SELECT to confirm. b. Turn SELECT to the region you wanted, press SELECT to confirm. c. Using the same method to choose country, station in turn, radio will perform loading.
Add Station to ‘My Favourites’ ☺ 1. Visit website: http://www.wifiradio-frontier.com ☺ 2. Click on the register link. ☺ 3. Create account login, enter Access code is required, for how to get this code, please refer to previous page. Note: want to member login? Therefore save your registered ‘Email address’ and ‘Password’. ☺ 4. You will able to take advatage of the various additional features and services offered by the Frontier internet Radio Portal. ☺ 5.
Add Station to ‘My Added Stations’ Even though the Internet radio portal contains thousands of stations, you may still want to listen to stations not listed. You can add your own stations via the portal. ☺ 1. Visit website: http://www.wifiradio-frontier.com ☺ 2. Login as a member (at previous page, you registered). ☺ 3. You will able to take advatage of the various additional features and services offered by the Frontier internet Radio Portal. ☺ 4.
Changing the Station Information It is possible to view the information that is displaying on the second line of the display when listening Internet program. To view more information, you can press INFO repeatedly. • Station Description This is scrolling text information supplied by the Internet station. It may comprise information on music titles or details of the programme which is provided by the broadcaster.
Shift to wired network Step 1 – Choose LAN Setting Note: a. Ensure LAN cable connecting to LAN socket already. 1. To access to this order, press MENU < System settings > < Network >, press SELECT to confirm. 2. Turn SELECT to < Manual settings >, press SELECT to confirm. 3. While cursor point to < Wired >, press SELECT to confirm. 4. While cursor point to < DHCP enable >, press SELECT to confirm. After a while, the Ethernet connection would be done.
Music Player Mode ∗ Setting up a Music Server In order for your radio play music files from a computer, the computer must be set up to share files or media. UPnP media sharing allows devices like this radio to play music from a shared media library, navigating through tag menus such as Artist, Album or Genre. If you are running a suitable server system such as a PC with Windows Media Player10 or later (WMP), and your music library is well-tagged, then it is recommended to use media sharing.
∗ Play Shared Media 1. Press MODE repeatedly until < Music player > is showing up. Note: Or, enter < Main menu >, and then turn SELECT to < Music player >, press SELECT to confirm. 2. While cursor point to < Shared media >, press SELECT to confirm, and then step by step to your selecting Music. Press or to shift tracks, Press to play or pause. 3. Adjust the volume by pressing VOL- or VOL+. ∗ Repeat Play Mode 1.
FM Mode ∗ General operation 1. Press MODE repeatedly until < FM Radio > is showing up. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last listened FM station will be selected. 3. 4. Note: or enter < Main menu >, and then turn SELECT < FM >, press SELECT to confirm. To manually adjust frequency, while frequency shows up, turn SELECT to adjust it by 0.05MHz per step. To auto-searching, while frequency shows up, simply press SELECT or SCAN.
Setting Station Presets Your radio can store 10 Internet and 10 FM stations preset. To store the current station: 1. Press PRESETS, and then turn SELECT to your expected option 1-10. 2. Press and hold SELECT to confirm, your radio would indicate ‘Preset stored’, and then your radio will return to its normal working condition, and preset icon appeared on display. Selecting a Preset Station To select a stored Internet station: 1. Press MODE to go into relative mode: Internet or FM mode. 2.
General Operation Return to Main Menu ∗ ∗ Press MENU, and then turn SELECT to < Main menu >. Or, you can move back to radio’s top-line < Main menu >, at any time by pressing BACK repeatedly. Adjust Volume Level ∗ Adjust the volume level by pressing VOL+ or VOL-. ∗ Radio will remember its previous volume level.
Setting Alarm Note: Setting Alarm, make sure setting time at first. 1. It can be activated by pressing MENU < Main menu > < Alarms >, press SELECT to confirm. 2. Turn to your expected one, press SELECT to confirm. 3.
System settings Equaliser Note: Several preset EQ modes are available; also a user-defined setting through ‘My EQ profile setup’. 1. It can be activated by pressing MENU < System settings > < Equaliser >, press SELECT to confirm. 2. Turn SELECT to your preferred one, take set ‘My EQ profile setup’ as example, a. Press SELECT to confirm ‘My EQ profile setup’. b. Press SELECT to confirm Bass, turn SELECT to adjust, and then press SELECT to confirm. c. Setting Treble, Loudness accordingly. d.
Download Scansonic Via App Store: Note: the first generation of iPod Touch/iPhone is not compatible with App. Using the Wireless Device Remote Control application, you can control Scansonic radio from iPod Touch/iPhone/iPad. 1. In your iPod Touch/ iPhone/iPad’s main menu, open the App Store by clicking the App store icon, as the photo at right side: 2. In the App store, search for ‘Scansonic’. 3. Touch ‘Scansonic’ icon, and then hit the "free" button, it will then change the "free" to "install".
Language 1. It can be activated by pressing MENU < System settings > < Language>, press SELECT to confirm. 2. Turn SELECT to your preferred one, and then press SELECT to confirm, it is done! Factory Reset A factory reset resets all user settings to default values, so time/date, network configuration and presets are lost. However, the radio’s current software version is maintained, as is registration with the Internet radio portal.
Enter Setup Wizard When this unit is started for the first time, it runs through a setup wizard to configure settings for date/time and network. Once this is finished, the system is ready to use in most modes. 1. To run the setup wizard again, the path is: < System settings > Setup wizard Yes. 2. Press SELECT to confirm ‘Yes’, then step by step to set it. SW Version and Radio ID Note: This information may be requested when dealing with technical support issues. 1.
Troubleshooting If you experience any trouble with your wireless Internet Radio, then you may find it useful to visit the help section on our webpage: http://www.wifiRadio-frontier.com If you have trouble connecting the Radio to your wireless network, these steps may help to resolve the problem: 1. Confirm that a Wi-Fi connected PC can access the Internet (i.e. can browse the web) using the same network. 2. Check that a DHCP server is available, or that you have configured a static IP address on the Radio.
Specification ITEMS SPECIFICATIONS Description: FM/Internet Radio Power Requirements: AC adapter Input: 100-240Vac, 50-60Hz (Please use our provided power adapter only) FM Frequency Range: 87.5-108MHz Rated Output Power: 5Wrms Speaker 4 ohm Earphone Jack 32 ohm Dimensions 204 x 121 x 130 mm This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste.
