User`s guide

“Copy Function” Section 60
OK
This button saves your updated settings.
Using the Scan To Key on the Control Panel To Scan
1 Place the original face up in the ADF or face down on the flatbed glass.
2 Press the Scan To key on the control panel.
3 Press the scroll keys to select an application in the display on the control
panel.
4 Press the Select key to confirm the selected application.
5 Press the Start key to start the scanning process.
“Copy Function” Section
The three copy buttons in the “Copy Function” section of the LinkMagic win-
dow can be customized to perform the N in1 function if you load documents in
the ADF.
Follow the directions below to choose one of the three copy buttons.
" Do not press the Start key on the machine while copying; otherwise,
decreased image quality may result.
z : Prints 1 original image on one sheet of paper.
z : Prints 2 original images reduced to fit onto one sheet
of paper.
z : Prints 4 original images reduced to fit onto one sheet
of paper.
To configure one of the three copy buttons, right-click it, and then click Con-
figuration. The Copy dialog box for the button appears.
" 2-to-1 and 4-to-1 copying is not possible with LinkMagic from the flat-
bed glass. Use the PagePro 1390 MF control panel to print 2-to-1 and
4-to-1 copies from the flatbed glass.