User`s guide

Setting Copy Options54
6 Place the next document page on the flatbed glass. Press the Start key.
The message window displays Next Scan :START Scan End : #.
7 Repeat the previous step to finish scanning all pages of the document.
8 Press the # key on the number keypad to start collating.
9 The machine starts printing according to the selected Collate option.
N in 1
To use the N in 1 function, press the N in 1 key.
Each time you press the key, the LED labeled with the selected mode lights.
You can choose from the following N in 1 modes.
z : Prints 4 original images reduced to fit onto one sheet
of paper.
z : Prints 2 original images reduced to fit onto one sheet
of paper.
z : Prints 1 original image reduced to fit onto one sheet of
paper.
" The N in 1 function does not support the Collate or Zoom functions.
" If you load the original document into the ADF, the function automati-
cally starts scanning all the pages. If you place the document on the
flatbed glass, manually perform the following operation.
1 Place the original document face down on the flatbed glass and align its
center with the arrow mark on the glass.
2 Gently close the ADF lid.
3 Press the N in 1 key to select your option.
4 Press the Start key. The message window displays Next Scan
:START Scan End : #.
5 Place the next document page on the flatbed glass. Press the Start key.
The message window displays Next Scan :START Scan End : #.
6 Repeat the previous step to finish scanning all pages of the document.
7 The machine starts printing. (If you selected 2-in-1, the machine scans
two pages, then prints out one. If you selected 4-in-1, the machine
scans four pages, then prints out one.)