User`s guide

Setting Copy Options52
Reduce/Enlarge
You can select the following enlargement or reduction ratios.
Fit To Paper calculates the ratio that fits the size of your media. A docu-
ment where the image is printed to the edges of the paper can be slightly
reduced so that no part of the image is cut off in the copy.
Custom allows you to set a ratio between 25% and 400% in 1% increments.
To Select From the Predefined Copy Sizes
1 Press the Reduce/Enlarge key. The default setting appears on the upper
line of the display.
2 Press the Reduce/Enlarge key or a scroll key to find the desired size set-
ting.
3 Press the Select key to make the selection.
To Fine-Tune the Size of the Copies
1 Press the Reduce/Enlarge key.
2 Press the Reduce/Enlarge key or a scroll key until Custom xx% appears
on the upper line of the display.
3 Press the Select key.
4 Use the numeric keypad or the scroll keys to enter the desired copy size.
5 Press the Select key to make the selection.
Original 100%
Custom (25-400%)
Fit To Paper
A4 % Letter 94%
Letter % A4 97%
Legal % Letter 78%
Legal % A4 83%