User`s guide

Media Types22
" Keep media between 30% and 65% relative humidity. Toner does
not adhere well to moist or wet paper.
 Layered
 Adhesive
 Folded, creased, curled, embossed, warped, or wrinkled
 Perforated, three-hole punched, or torn
 Too slick, too coarse, or too textured
 Different in texture (roughness) on the front and back
 Too thin or too thick
 Stuck together with static electricity
 Composed of foil or gilt; too luminous
 Heat sensitive or cannot withstand the fusing temperature (205°C
[401°F])
 Irregularly shaped (not rectangular or not cut at right angles)
 Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
 Acidic
 Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m
2
(24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
DO NOT use thick stock that is
 Mixed with any other media in the trays (as this will cause misfeeds)
Capacity Media Tray Up to 10 thick stock sheets, depending on
their thickness
Manual Feed
Tray
1 sheet only
Orientation Face up
Driver
Media Type
Thick Paper
Weight 91 to 163 g/m² (25 to 43 lb bond)