User manual

Program Operation - Scanning a new document 13

Recognition) from a scanned image, from the scanned image Barcode, or from the

document magnetic strip if a magnetic reader was used. The extraction method used

depends on the selected category. Irrelevant fields are disabled (depending on the

state). The data displayed in the ID Data window can be reviewed and edited. Once

a new ID card is scanned, this data is transferred to a text file (if this option is

enabled).

Figure 2: ID Data (basic mode)

The ID Data window can be viewed in three modes:

• Basic mode: Only the most important data is displayed.

• Detailed mode : Displays all the data on the card (click on the Details button).

• Custom mode: lets you add custom, user-defined fields and data (click on the

Custom button), see Custom fields - User defined fields in the next page.

You can toggle between the three modes using the Basic / Details / Custom buttons at the

bottom of the ID Data window.

EDITING DATA

You can edit data in the fields of the ID data window. Note that the changes you make will

be saved.