User manual

Program Operation – ID Data 30
ID Data (*ScanShellOCR Only)
After scanning and processing the ID card, you can review the acquired text
information by opening the ID Data window. To open the ID Data window, press the
button titled ‘OCR’ on the main screen.
The ID Data window shows the data retrieved either from the scanned image by OCR
(Optical Character Recognition), or from the scanned image Barcode, depending on
the option selected. Irrelevant fields are disabled (depending the state). The data
shown in the ID Data window can be reviewed and edited. Once a new ID card is
scanned, this data is transferred to a text file (if this option is enabled).
Figure 11: ID Data (detailed mode)
The ID Data window can be viewed in two modes:
• Basic mode: Only the most important data is shown.
• Detailed mode: Shows all the data on the card.
You can toggle between the two modes using the Basic / Detailed button at the
bottom of the ID Data window.
ID data saving
Text data saving options are controlled from the configuration panel ‘Data Extraction’
tab. See ‘Data extraction tab (*ScanShellOCR Only)’
page 17.