Specifications

24
Automation tab
Data Source
The Data Source section determines the data input source: Scanners, magnetic strip or
image file.
Checking the ‘Scanner’ option does the following:
 Sets the scanner as the input image device.
 Sets the Scan button icon to a scanner image in the main screen.
 Enables the lower checkbox, titled ‘Paper auto detection’.
Checking the ‘Image File’ option does the following:
 Sets the image source as a local image file from the hard disk.
 Sets the Scan button icon to an ‘Open file’ image in the main screen.
 Disables the lower checkbox, titled ‘Paper auto detection’.
Checking the ‘Magnetic Strip’ option does the following:
 Sets the Magnetic Strip Reader as the input device.
 Sets the Scan button icon to a magnetic strip card image in the main screen.
 Disables the lower checkbox, titled ‘Paper auto detection’.
Checking the 'Automatic scan size' option does the following:
(This feature is available only if the ScanShell® 800\N scanner is connected!)
It allows for the scanning of undefined document sizes and continuous scan of the full
length of the document. Once the scan is complete, the image is cropped automatically to
its proper size. This feature is useful for scanning different documents of different sizes.
Paper auto detection - Checking this option will cause the scanner (ScanShell® 800) to
auto-detect document insertion and start the scanning and saving process automatically.
When using the ScanShell® 1000 scanner, any of the scanner buttons can be pressed to
start the scan.
If the ‘Paper auto detection’ is unchecked, the scanner starts scanning when you click
on the Scan button in the main screen.