User Manual

Users / service manual for Scanomat TopBrewer Pro
Congratulations on your choice of Scanomat Coffee Brewer.
Should you have any questions regarding the coffee brewer and the
operation of it please do not hesitate to contact us.
We are convinced that you will be pleased with your choice!
Operation of the SCANOMAT Coffee Brewer
The Scanomat coffee and coffee speciality brewers are high technology brewers which by means of a
micro processor controlled brewing process dispenses various first class quality coffee drinks. Water is
heated in the thermostatically controlled hot instant solid state boiler with automatic water inlet. The
boilers have built-in safety switches. By means of a grinder, coffee beans are grinded and led to a brew
chamber and here water is added. If necessary, coffee can be tampered in the brew chamber. The
finished coffee drink is led to the “Swan Neck” outlet.
Important:
Warning:
Please be aware of the danger of scalding (in the dispensing area) when dispensing the various hot
drinks.
Warning:
Before cleaning, servicing etc. that require the opening of the front door, the switch situated in the
delivery area must be switched off. The brewer has been switched off when the display light turns
off and the fan stops.
Note:
Please be aware that the switch only disconnects control circuit, not the power supply.
Warning:
This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not play with the appliance.
Warning:
Access to the service area is restricted to persons having knowledge and practical experience of the
appliance, in particular as far as safety and hygiene are concerned.
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone [phone] • Telefax [phone]
!4