User Manual
ManualsBrandsScanomat ManualsCommercial Beverage Equipment1558usver15.06 TopBrewer Pro Coffee System with 2 High Volume 64mm Pro Flat-burr Grinders, 6.9 kW Heating Power, Pro Vane Pump, Swam Neck, Drip-Tray Flush Mounted, Drain Plug, Welcome Kit with Cleaning Tablets and Accessories, Drain Required, 1 Phase 208-
Users / service manual for Scanomat TopBrewer Pro
Turning the machine on and off:
There are 2 ways of turning the machine off. Either by pressing and holding the ON/OFF button for 2
seconds, or by switching the power off completely by activating the mechanical switch in the dispensing
area.
Using the first option, will keep the electronic board running with a very low power consumption (less
than 1 watt). As the internal watch in the machine is dependant on power, always select this way to turn
the machine off, if you are using this. When the machine is OFF, the light in the display will be gone,
and only the Scanomat logo will be active.
Switching back on is done by pressing the ON/OFF button, or if this setting is active, by pressing a
selection button
Dispensing a single standard drink:
Place a cup under the proper dispensing outlet and press the selection button. If more than one outlet is
available, a graphic on the front of the machine will show which selections correspond with which
outlets. While brewing the display will show the name of the selected drink
!
Pre-selections:
Apart from the direct selection buttons, a number of pre-selection possibilities are available, these will
be explained in detail hereafter. The pre-selections can be used more than one at a time, for example a
carafe of strong decaf coffee is possible, if the machine has all these 3 options available. To cancel any
pre-selection, press STOP or NO. All the preselections are controlled by a timer meaning that if no
selections is made within 15 seconds after the pre-selection, this will time out. After the drink is
dispensed, all pre-selections are reset, so if e.g. 2 strong coffees are wanted the, strong needs to be
pressed before each cup.
Dispensing carafes:
Making a carafe of any product in this machine is always carried out as making a number of cups of the
selection in question.
Place a carafe under the proper dispensing outlet. If more than one outlet is available, a graphic on the
front of the machine will show which selections correspond with which outlets. Either press a direct
carafe button, if such is available on the keypad, otherwise use the navigation button to scroll up to a
carafe. The display will show:
! !
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • Telefax +45 49 18 01 18
!23