User Manual

Users / service manual for Scanomat TopBrewer Pro
(See daily maintenance).
BOTTOM PISTON ERROR Press STOP, and press YES + CLEAN.
NO BEANS shows in display Check the bean canister.
Display shows OVERLOAD One of the outputs are overloaded.
Milk is not warm enough Clean the steam nozzle and milk orifice.
Brewing coffee/espresso very slow. Clean the top piston filter.
Adjust the coffee/espresso grinder coarser.
Brewing coffee/espresso very fast. Adjust the coffee/espresso grinder finer.
Operational procedures:
The keyboard:
!
Selection buttons:
The selection buttons will, when the machine is operational, meaning water in the tank and warm
enough dispense the selected drink. Place the cup at the appropriate position. If more positions, the right
one, will be indicated on the front of the machine.
Pre-selection buttons
These buttons will activate a pre-selection to the next drink. The pre-selection buttons may differ from
machine to machine and in some machines they may not all be active.
There is a time out of 15 seconds on all pre-selections.
Multiple pre-selections are allowed e.g. strong, carafe
Pressing NO or STOP will cancel all pre-selections
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone [phone] • Telefax [phone]
!21