User Manual
ManualsBrandsScanomat ManualsCommercial Beverage Equipment1558usver15.06 TopBrewer Pro Coffee System with 2 High Volume 64mm Pro Flat-burr Grinders, 6.9 kW Heating Power, Pro Vane Pump, Swam Neck, Drip-Tray Flush Mounted, Drain Plug, Welcome Kit with Cleaning Tablets and Accessories, Drain Required, 1 Phase 208-
Users / service manual for Scanomat TopBrewer Pro
The coffee brewer requires ventilation. See “TopBrewer-Pro_Installation-Overview”. The grating must
be inspected frequently and vacuum-cleaned. If the installation site/environment is especially dusty
there must be vacuum-cleaned each month.
Note:
Before connecting the coffee brewer draw off some buckets of water by means of the hose (to clean
the pipes and to avoid a disagreeable taste). This procedure is also recommended when the brewer has
not been operating for a longer period of time.
Note:
We recommend that the brewer be switched on permanently due to the ventilation system among
others.
Note:
The A-weighted noise pressure level of this appliance is less than 70 dB.
Note:
Coffee brewers equipped with steam generator (fresh milk system) must have a scale controller filter
in the water supply line.
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • Telefax +45 49 18 01 18
!12