User Manual

Care & User Manual Scanomat TopBrewer Compact
BT reset:
A function to reset the BlueTooth® module. You should carry this function out after consulting a
Scanomat technician!
BT iOs Support:
Must be set to ON if running with Apple devices on the BlueTooth®
BT Visible:
Must be set to ON, if the machine shall appear as a potential BlueTooth® device on nearby devices
with BlueTooth®.
BT Pairing:
Must be set to ON, if new devices should be able to pair their BlueTooth® with the one of the
Scanomat machine.
Weighing:
Weighing is a programme, where drinks are dispensed without water. The purpose is to verify the
dispensed amount of products in the drinks.
Press the navigation button UP or DOWN until the display shows:
Press YES and the display will show (example):
Pressing a selection button will now cause the machine to dispense the COFFEE product included
in this drink. If the selected drink does not contain COFFEE, nothing will happen.
In case of weighing coffee from the grinder, the door must be open, a magnet in place to simulate
the door switch, the scraper arm moved all the way out and something (e.g. the lower 25 mm of a
paper cup) placed on the scraper plate to collect the ground coffee.
Use UP and DOWN to select between the different products in the machine.
To get an average, take at least 5 portions before weighing it.
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone [phone] • www.scanomat.dk
28