User Manual

Care & User Manual Scanomat TopBrewer Compact
Press YES and the display will show:
!
Press UP or DOWN to reach the desired value and YES to confirm. A min and max limit for this
adjustment is pre-programmed into the machine preventing you from setting the value too low or
high.
Adjusting milk Temperature:
Enter the “Adjust” menu as described. Scroll to the “Temperature” menu and select “Milk Temp” as
shown below :
Milk temperature can be adjust as desired from value -10 to 10. A higher number means a higher
temperature. Lower means higher temperature and vice versa.
(NOTE: Essentially the adjustment is
altering the speed of the milk pump, causing the temperature alteration. The system account for the new speed in all it’s
calculations. )
Press YES and the display will show:
Press UP or DOWN to reach the desired value and YES to confirm. Temperature can be adjusted
from value -10 to 10 .
Adjusting version:
Your coffee machine MAY be programmed with more than one set (version) of recipes. If this is the
case, you can switch between these different set by adjusting the active version.
Enter the adjust menu as described and scroll to:
Press YES, and the display will show:
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone [phone] • www.scanomat.dk
24