User Manual
ManualsBrandsScanomat ManualsCommercial Beverage Equipment1557usver02.01 TopBrewer Compact Pro Coffee System with 1 High Volume 64mm Pro Flat-burr Grinder, 4.6 kW Heating Power, Oscillation Pump, Swam Neck, Drip-Tray Flush Mounted, Drain Plug, Welcome Kit with Cleaning Tablets and Accessories, Drain Not Required
Care & User Manual for Scanomat TopBrewer Compact
Adjusting the brew limit:
The brew limit is the lowest temperature of the pre heater, where the machine will allow dispensing
of drinks. If the temperature of the boiler is below this value, the thermometer icon in the display
will be blinking.
Enter the adjust menu as described and scroll to:
Press YES and the display will show:
!
Press UP or DOWN to reach the desired value and YES to confirm. A min limit for this adjustment is
pre-programmed into the machine preventing you from setting the value too low.
Adjusting the bean to cup boiler temperature:
The bean to cup boiler temperature is temperature of the water reaching the beans.
Enter the adjust menu as described and scroll to:
Press YES and the display will show:
!
Press UP or DOWN to reach the desired value and YES to confirm. A min and max limit for this
adjustment is pre-programmed into the machine preventing you from setting the value too low or
high.
Adjusting the steamer temperature:
The bean to cup boiler temperature is temperature of the steam boiler used to generate steam for
the milk frothing.
Enter the adjust menu as described and scroll to:
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • www.scanomat.com
23
Note: Temperatures
much higher than 90
C
o
/ 194 F
o
can make
the coffee bitter and
unpleasant. We
recommend 86-88
C
o
/ 186-190 F
o