User Manual
ManualsBrandsScanomat ManualsCommercial Beverage Equipment1557usver02.01 TopBrewer Compact Pro Coffee System with 1 High Volume 64mm Pro Flat-burr Grinder, 4.6 kW Heating Power, Oscillation Pump, Swam Neck, Drip-Tray Flush Mounted, Drain Plug, Welcome Kit with Cleaning Tablets and Accessories, Drain Not Required
Care & User Manual Scanomat TopBrewer Compact
Water connection:
When the water supply is being established please make sure that the coffee brewer is not situated
on the rear end of the water supply system to ensure continuous supply of fresh water.
1. Connect your approved water line (not included from factory) to the ⅜ thread check-valve
supplied in the TopBrewer Filter Start Kit. Before connecting the brewer draw off portions of water.
We always recommend using TopBrewer filtration systems.
2. Fasten the hose nipple to the valve
3. Turn on the water and make sure that all joints and connections are tight.
Note:
It is important that the inlet water supply in a primary supply with its own ‘stopcock’ this is to ensure
that during daily operation there is a constant water pressure at the inlet.
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • www.scanomat.dk
10