Information
Report No.: NBHT20141126U01 Page 13 of 13 pages
注 意 事 项
Important
1. 本报告无检验单位公章、骑缝章无效;
The test report is invalid without the official stamp and Paging seal of Guangzhou MCM
Certification and Testing Co., Ltd.
2. 未经本试验室书面同意,不得部分地复制本报告。
Nobody is allowed to photocopy or partly photocopy this test report without written
permission of Guangzhou MCM Certification and Testing Co., Ltd.
3. 本报告无批准人、审核人及检测人签名无效。
The test report is invalid without the signatures of Approver, Checker and Tester.
4. 本报告涂改无效。
The test report is invalid if altered.
5. 对检验报告若有异议,应于收到报告之日起十五天内向检验单位提出。
Objections to the test report must be submitted to Guangzhou MCM Certification and
Testing Co., Ltd. Within 15 days.
6.本报告中以逗号代替小数点。
Throughout this report a comma is used as the decimal separator.
7.本报告仅对来样负责。
The test report is valid for the tested samples only.
检测单位:广州邦禾检测技术有限公司
Laboratory:Guangzhou MCM Certification and Testing Co., Ltd
地 址:中国 广州市番禺区市广路钟三路段 13 号之一
Address: 1 F No.13, Zhong San Section, ShiGuang Road, Panyu District, Guangzhou
City, Guangdong Province, China.
电 话:0086-20-34777662
0086-20-34777663 Email: mark.miao@mcmtek.com
传 真:0086-20-34777665-609 Web: Http://www.mcmtek.com










