Information

Report No.: NBHT20141126U01 Page 11 of 13 pages
Appendix 7
附表 7
Test Items
测试项目
Overcharge
过度充电
1,1
Test procedure
测试步骤
When the manufacturer’s recommended
charge voltage is not more than 18V, the
minimum voltage of the test shall be the
lesser of two times the maximum charge
voltage of the or 22V
如果厂家推荐的充电电压不超过 18V，本测试
的最小充电电压应该是两倍的厂家推荐的最
大充电电压或者是 22V
The manufacturer’s recommended
maximum charge voltage is 4,28V. The
manufacturer’s recommended maximum
continuous charge current is 2600mA.The
voltage of the test is 8,56V. And the Current
is 5200mA.
厂家推荐最大充电电压为 4,28V，厂家推荐最
大充电电流为 2600mA.测试的电压为 8,56V，
电流为 5200mA。
When the manufacturer’s recommended
charge voltage is more than 18V, the minimum
voltage of the test shall be 1,2 times maximum
charge voltage
如果厂家推荐的充电电压超过 18V，本测试的
最小充电电压应该为 1,2 倍的厂家推荐的最
大充电电压
/
1,2
Sample status
样品状态
C16#~C19#, at first cycle in fully charged states;
C16#~C19#,在第一个循环完全充电状态；
C20#~C23#, after 50 cycles ending in fully charged states;
C20#~C23#,在第五十个循环完全充电状态；
1,3
Result
测试结果
Sample No.
样品编号
Voltage Before test(V)
测试前开路电压(V)
Test result
测试结果
Remark
备注
C16#
4,18
O
/
C17#
4,18
O
/
C18#
4,17
O
/
C19#
4,18
O
/
C20#
4,17
O
/
C21#
4,18
O
/
C22#
4,18
O
/
C23#
4,18
O
/
Note: D -Disassembly, F-Fire, O- no disassembly, no fire.
注： D- 解体；F - 起火；O-无解体、无起火。