User Manual

User Programmable Commands
Up to 10 commands can be generated, edited, saved and sent to the vehicle computer. This allows for
future codes and some special commands to be added by the user.
Flash Memory
The ScanGauge uses a type of memory that doesn’t require batteries or a source of power to maintain.
This means that your settings will not be lost if you disconnect the vehicle battery or disconnect the
ScanGauge.
Automatic Sleep Mode
About 12 seconds after turning off the vehicle or pressing a button after the vehicle engine is turned
off, the ScanGauge will automatically power down into a sleep mode. Starting the engine or pressing
the HOME button will automatically reactivate the ScanGauge, and it will return to the screen and lamp
settings it had just before it went to sleep.
If you need to disconnect the ScanGauge, wait until it has gone to sleep before
you do it. This will allow all settings and trip information to be saved in Flash
memory and restored when it is reconnected.
Customizable Backlight Color
Choose from 7 standard backlight colors or program your own for 63 possible colors. The backlight
intensity is also adjustable and can be set to Off, Low and High intensities.
<SCAN
<TRIP
GAUGE>
MORE>
SCAN
Use the Scan Tool to view and clear Trouble
Codes and turn off the check engine light
GAUGE
Use the function button next to GAUGE to
display up to 4 real-time Digital Gauges
TRIP
Press the function button next to TRIP to access
the 4 built-in Trip computers. The built-in Trip
computers give you the ability to view and track
useful information about the trip you take as
you drive.
MORE
Press the function button next to MORE
to access the settings and configuration
options for the ScanGauge.
Overview
7