User Manual

Reading Performance Monitor™ Data
The data the Performance Monitor records can be read through the DATA screen. The data screen
displays the speed, distance and elapsed time for each data point. A data point is generated each time
the Performance Monitor records data.
While viewing the Data screen, you can use
the upper left and right function buttons to step
through the data points.
Stepping Through Recorded Data
The lower right function button toggles the step-
through mode, allowing you to step through the
data points using the different criteria. The currently
selected step-through mode is shown next to the
lower right function button.
The information layout on the DATA screen maintains
a consistent layout as you switch between data step-
thru modes. For instance, Distance (ft) is shown in
the upper left of the screen, while speed (MPH/KPH)
is shown in the upper right of the screen, and elapsed
time (Sec) is shown near the bottom middle portion
of the screen.
See the chart Step-Through Parameters and
Recording Rates on the following page for more
information about each Data parameter and step-
through intervals.
<712ft 84MPH>
<BACK 8.4Sec T>
Example
Data Screen
Push the upper left and right function
buttons to step through the data
Push to return to the previous screen
Displays the elapsed time recorded for the current data point
Indicates the currently selected step-through parameter (see chart below)
Push the lower right function button to toggle the step-through parameter (see chart below)
Displays the MPH/KPH recorded for the current data point
Displays the distance traveled for the
current data point
<DATA MONITOR>
<MEMORY ARM>
Step-thru by Time
Step-thru by Speed
Step-thru by Distance
Monitored Gauge
<660ft 82MPH>
<BACK 7.9Sec D>
<4580RPM 105MPH>
<BACK 13.4Sec M>
<1320ft 105MPH>
<BACK 13.2Sec S>
<712ft 84MPH>
<BACK 8.4Sec T>
<712ft 84MPH>
<BACK 8.4Sec T>
<1320ft 105MPH>
<BACK 13.2Sec S>
<660ft 82MPH>
<BACK 7.9Sec D>
<4580RPM 105MPH>
<BACK 13.4Sec M>
Advanced Features
47