User Manual

WARNING

Use of the ScanGauge while driving could lead to an accident and serious injuries.

The primary attention of the driver should always be on safe driving. As with any

gauge or other instrumentation system in a motor vehicle, the information should

be observed as part of a normal sequence of observations performed in the

operation of the vehicle. Changes to the selections in the ScanGauge should

only be made when it is safe to do so. The driver must remain attentive to driving

the vehicle.

The mounting of the ScanGauge and the routing of the cable connecting it to

the vehicle should be done with suitable caution so it does not create an unsafe

condition. This includes but is not limited to the following restrictions:

• Do Not mount the ScanGauge where it can obstruct the

view of the driver.

• Do Not mount the ScanGauge in a manner that could cause

it to be propelled through the vehicle during an accident

causing injury, such as over or near an air bag.

• Do Not route the cable in a manner that would interfere

with the operation of the vehicle controls.

RIGHTS AND OBLIGATIONS

The ScanGauge may be used on any number of vehicles. The software

contained in the ScanGauge is copyright protected by Linear Logic and may not

be transferred or disassembled and used in another product, in part or in whole.

The artwork used in generation of the circuitry is also copyright protected and

cannot be used in part or in whole by any person or entity without the express

written permission of Linear Logic.

2 — www.ScanGauge.com