User Manual

Basic Setup Parameters
Setup Parameter Display Options Description
Distance Units DISTANCE Miles
Kilometers
The Setup Parameters include multiple
units of measure settings, including
Distance, Fuel, Temperature and Pressure.
Each is set independently of the other and
can be used in any combination.
Making changes to these settings causes
your ScanGauge to use these units when
reporting and measuring data.
Fuel Units FUEL UNITS Gallons
Liters
Temperature Units TEMP UNITS Fahrenheit(˚F)
Celsius(˚C)
Pressure Units PRESSURE
UNITS
PSI
KPA
Engine Size ENGINE SIZE 0.0 - 9.9 (Liters) Increase or decrease the Liters size until it
matches the size of your engine.
Tank Size TANK SIZE 0 - 255
Gallons/liters
Is adjustable in 1-gallon or liter increments
depending on how you set the FUEL
UNITS parameter.
Fuel Type FUEL TYPE GAS
DIESELa
DIESELb
HYBRID
LPG.
Most diesel vehicles use the DIESELa
setting. See special notes below.
Hybrid vehicles must choose HYBRID or
the ScanGauge will go to sleep when the
engine automatically shuts off.
Set to LPG for propane powered vehicles.
Currency Type CURRENCY
$, £, ¥, €
Choose the currency symbol ScanGauge
should use to display monitor values.
Tips for Setting the Tank Size
The size will use Gallons or Liters depending on the selection you made in the Fuel Units Screen (FUEL
UNITS). If the size in the manual is not in whole units, use the next lower value. For instance, if the
capacity is 17.5 gallons, use 17 gallons.
It is dangerous to run a vehicle out of fuel and can damage the fuel pump. Do
not rely on the fuel gauge or ScanGauge at low fuel levels or low remaining
distance or time.
12 — www.ScanGauge.com