Technical data

FITTING OF ACCESSORIES16
Cable with male connector for fan.
Remove the bracket from the male connector.
Fit the bracket onto the cassette with the two supplied screws.
Fit the cable with female connector for ES 904 through the hole in
the cassette.
Fit the cable with female connector for ES 904 into the bracket and
attach the cable to the cable relief and place it inside the hole in the
cassette.
Position the insert in the cassette.
Insert the male connector from the fan in the female connector for
ES 904.
Fit the fan into the insert and tighten. Fit the damper.
Place the cable under the two plugs as shown below.