Technical data

FITTING OF ACCESSORIES 15

Cable relief and screws

for bracket

Regulator ES 904 Cable for connection bet-

ween ES 904 and fan

Fitting the fan

The Installation must be planned and executed in accordance with national and local regulations.

In order to ensure correct installation, an authorised electrician must carry out the installation of the fan.

Scan A/S disclaims all liability for the installation of the fan.

Removing the damper Removing the grid

Loosen the screws and remove the grid. The grid is not to be reused.Remove screws and damper. After fitting the fan, refit the damper.

Fan