Specifications

CV-A10 CL and CV-A70 CL
4. Locations and Functions
6
6
5
4
3
2
1
1 Lens mount of C-mount type. *1)
2 Interline-transfer CCD sensor.
3 Camera Link connector
4 12 pin connector for DC +12V power external sync signals.
5 LED for power and trigger indication
6 Mounting holes 10 x M3deept4.
*1) Note: Rear protrusion on C-mount lens must be less than 9.0mm.
When IR cut filter is used, it must be less than 6.0 mm.
The IR cut filter is placed in the C-mount thread.
The C-mount 25 mm IR cut filter must be ordered separately.
Fig. 1. Locations
- 3 -