Specifications

CV-A10 CL and CV-A70 CL
10.2. Specification table
Specifications CV-A10 CL CV-A70 CL
Scanning system Progressive scan
Frame rate full frame 60 frames/sec. Progressive
(625 lines/frame)
Pixel clock 36.15 MHz
Line frequency 37.5 kHz
(964 pixels clock/line)
CCD sensor 1/2”. Monochrome ICX-415AL 1/2”. Color ICX-415AQ
Sensing area 6.4 (h) x 4.8 (v) mm
Cell size
8.3 (h) x 8.3(v) µm
Effective pixels 782 (h) x 582 (v)
Pixels in video output. Full
1/2 partial
¼ partial
1/8 partial
768 (h) x 576 (v) 60 fps
768 (h) x 287(v) 112 fps
768 (h) x 143 (v) 177 fps
768 (h) x 71 (v) 250 fps
Sensitivity on sensor
6 Lux (Min. gain, 100% video)
0.8 Lux (Max gain, 50% video)
14 Lux (Min. gain, 100% video
1.3 Lux (Max. gain, 50% video)
S/N ratio >55 dB >54 dB (on Green)
Video output. Digital 8/10 bit Camera Link
Iris video output. Analogue 0.7 Vpp
Gain
Gain range
Manual - automatic
-3 to +12 dB
Manual - automatic
-3 to +12 dB. (–3 to +9 dB in aut.)
Gamma 0.45 – 1.0 1.0
Synchronization Int. X-tal. Ext. HD/VD or random trigger
Ext HD/VD in.
(Not in binning modes)
4 V ±2 V. TTL or 75 Ω terminated
Tracking range for H
37.50 KHz ±1%
Trigger input. TTL
Camera Link
4 V ±2 V. TTL or 75 Ω terminated
Via Camera Link
EEN output
4 V from 75 Ω source
Trigger modes Continuous, Edge Pre-Select, Pulse Width Control, and Sensor Gate control
Accumulation LVAL synchronous or asynchronous
Shutter speed EPS 1/60 to 1/300,000 second
Programmable exposure
1/8 line to 625 lines. (3.3 µs to 16.7 ms)
Pulse width control 2 lines to 120 frames.
Auto shutter range 1/60 to 1/25,000
Readout modes Partial scan. Full, ½, ¼, 1/8
Vertical binning. Off, ½, 1/3, ¼
Horizontal binning. Off, ½, 1/3, ¼
Smearless
Partial scan. Full, ½, ¼, 1/8
Smearless
Control interface RS 232C or Camera Link
Functions controlled by RS
232C
Shutter, Trigger, Scanning, Read out, Polarity, Black level, Gain, Gamma
Operating temperature
-5°C to +45°C
Humidity 20 – 80% non-condensing
Storage temp/humidity
-25°C to +60°C/20% to 90%
Vibration 10G (20Hz to 200Hz, XYZ)
Shock 70G
EMC CE (EN50081-1 and EN50082-1), FCC part 15 class B
Power
12V DC ± 10%. 4 W. (<0.33A)
Lens mount C-mount (Flange back 17.526 mm -0.05mm)
Image centre ±0.1mm from C-mount centre
Dimensions 35 x 44 x 80 mm (HxWxD)
Weight 150g
Note: Above specifications are subject to change without notice
- 34 -