Specifications

3.6.4.3 : Program operation section
The program operation section allows the operator to select up to four
operations to run each time the operation timer triggers. The four pro-
grams are provided to allow SCAN’R to process the snapshots from up
to four AR125 ultrasonic receivers. This is the maximum number of re-
ceivers that can be run using a single computer.
The program operation section, figure 18, is composed of four rows of
control entries. Each row includes an enable check box, an input direc-
tory selection, and output file selection, and an archive directory se-
lection.
The enable check box activates or deactivates each program. The pro-
gram is active only when the check box is checked. Clicking on the
check box changes its state. Each time the operation timer is activated it
will process all of the programs that are enabled in sequence, top to bot-
tom.
The input directory selection allows the operator to select the directory
that SCAN’R will process. The selection should be set to a directory that
is being using to store snapshot recordings. To select a directory, click on
the Input… button. This will bring up a directory browsing GUI. Navi-
gate through the directory structure to select the desired directory. Then
click on the OK button.
Figure 18: Program operation section