Technical data

12 ASSEMBLY
600
350
Scan 58-2 Wall & Scan 58-5 Wall (with half lateral glass panes)
Scan 58-3 Wall & Scan 58-6 Wall (with full lateral glass panes)
Scan 58-1 Wall & Scan 58-4 Wall (without lateral glass panes)
Non-flammable wall
Flammable wall
Non-flammable wall
Flammable wall
Product registration number
Adjusting screws
Adjusting screws
The Scan 58 has four adjusting screws under the plinth of the wood-
burning stove. Use the adjusting screws to get the stove to stand
vertically.
Tilt the plinth and adjust the screws before fitting the stove in place.
On the Scan 58-7, Scan 58-8, Scan 58-9 and Scan 58-10 you can also
choose to adjust the adjustment screws in the magazine under the
combustion chamber.
If you are using a shaped floor plate, you should adjust the stove
upwards to allow the plate to be inserted under the front of the stove.
Adjusting screws
Product registration number
Open the door and read the product registration number. Make a
note of the number below. This number must be kept safe, in case
you need to contact us.