User guide

Remedy: Perform the following:
• Check for any obstructions or paper jams in the Finishing Module and Finishing
Transport paper paths and clear them.
• If necessary, power Off/On the machine, and if necessary, resend/restart your print
job.
• If the fault persists, contact the Customer Support Center.
051-111
Cause: Paper jam
Remedy: Perform the following:
• Check for any obstructions or paper jams in the Finishing Module and Finishing
Transport paper paths and clear them.
• If necessary, power Off/On the machine, and if necessary, resend/restart your print
job.
• If the fault persists, contact the Customer Support Center.
051-210
Cause: Registration clutch solenoid fault
Remedy: Perform the following:
• If necessary, power Off/On the machine, and if necessary, resend/restart your print
job.
• If the fault persists, contact the Customer Support Center.
051-211
Cause: Diverter solenoid fault
Remedy: Perform the following:
• If necessary, power Off/On the machine, and if necessary, resend/restart your print
job.
• If the fault persists, contact the Customer Support Center.
051-300
Cause: Finishing Transport front door is open
Remedy: Close the front door of the Finishing Transport.
051-310
Cause: Finishing Transport firmware fault upgrade
Remedy: Perform the following:
• If necessary, power Off/On the machine, and if necessary, resend/restart your print
job.
• If the fault persists, contact the Customer Support Center.
24-41Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Standard Finisher Plus