Specifications

Trend Micro™ OfficeScan™ 10 Administrator’s Guide
9-30
Use Automatic Configuration Script
OfficeScan uses the proxy auto-configuration (PAC) script set by the network
administrator to detect the appropriate proxy server.
Client Grouping
This setting is used only during client installation. The installation program checks the
network domain to which a target computer belongs. If the domain name already exists
on the client tree, the client on the target computer will be grouped under that domain
and will apply the settings configured for the domain. If the domain name does not
exist, OfficeScan adds the domain on the client tree, groups the client under that
domain, and then applies the root settings to the domain and client.
Specify whether the installation program will check the NetBIOS, Active Directory, or
DNS domain name.
Client Connection with Servers
Icons on the client computer’s system tray indicate the client’s connection status with
the OfficeScan server and a Smart Scan Server (if the client uses smart scan).
Users need to take action when the icon indicates any of the following conditions:
• Pattern has not been updated for a while.
• Real-time Scan is disabled.
• Real-time Scan service was stopped. OfficeScan uses the Real-time Scan Service not
only for Real-time Scan, but also for Manual Scan and Scheduled Scan. This means
that if the Real-time Scan service stops, the client computer becomes unprotected.
• A smart scan client is not connected to any Smart Scan Server.
See Required Actions on page 9-35 for steps that users can take when any of these
conditions arise.