Specifications

Trend Micro™ OfficeScan™ 10 Administrator’s Guide
5-16
To configure the Smart Scan Server list:
PATH: SMART SCAN > SCAN SOURCE > INTERNAL CLIENTS
1. Select whether clients will use the standard list or custom lists.
2. Click Notify All Clients. Smart scan clients automatically refer to the list you have
configured.
Standard List
The standard list is used by all internal smart scan clients. You can configure clients to
use proxy settings when connecting to the Smart Scan Servers on the list. For details, see
Internal Proxy on page 9-39.
To configure the standard list:
PATH: SMART SCAN > SCAN SOURCE > INTERNAL CLIENTS
1. Click the standard list link.
2. In the screen that opens, click Add and specify the Smart Scan Server’s address (in
URL format).
To obtain the Smart Scan Server address:
• For the integrated Smart Scan Server, open the OfficeScan Web console and go
to Smart Scan > Integrated Server.
• For the standalone Smart Scan Server, open the standalone server's console and
go to the Summary page.
Tip: Because the integrated Smart Scan Server and the OfficeScan server run on the
same computer, the computer’s performance may reduce significantly during
peak traffic for the two servers. To reduce the traffic directed to the OfficeScan
server computer, assign a standalone Smart Scan Server as the primary scan
source and the integrated server as a backup source.
3. Click Test Connection to verify if connection to the server can be established.
Click Save when the test connection is successful.
4. Click the link under Smart Scan Server Address to modify the server’s address.