Specifications

Trend Micro™ OfficeScan™ 10 Administrator’s Guide
3-42
4. Click Start. Vulnerability Scanner begins listening for DHCP requests and
performing vulnerability checks on computers as they log on to the network. When
it detects an unprotected computer and verifies that the computer's IP address
belongs to the defined IP address range, Vulnerability Scanner runs remote
installation to install the OfficeScan client.
5. To save the results to a comma-separated value (CSV) file, click Export, locate the
folder where you want to save the file, type the file name, and click Save.
Creating a Scheduled Task
Scheduling tasks in Vulnerability Scanner allows you to periodically check the network
for installed antivirus solutions. This is a convenient way of running tasks automatically,
without having to configure Vulnerability Scanner every time.
To create a scheduled task:
1. Navigate to <Server installation folder>\PCCSRV\Admin\Utility\TMVS and
double-click TMVS.exe. The Trend Micro Vulnerability Scanner console appears.
2. In the Results table, click the DHCP Scan tab.
Note: The DHCP Scan tab is not available on computers running Windows 2008.
3. Under Scheduled Scan, click Add/Edit. The Scheduled Scan screen appears.
Configure the following:
• Name: Type a name for the scheduled scan.
• IP address range: Type the IP address range of the computers you want to
check.
• Start time: Type or select the time when the scan will run. Use the 24-hour
clock format.
• Frequency: Select how often the scan will run. Choose from daily, weekly, or
monthly.
• Settings: Click Use current settings to use existing settings, or click Modify
settings. If you click Modify settings, click Settings to change the
configuration.
4. Click OK. The scheduled scan you created appears under Scheduled Scan.
5. To execute the scheduled scan immediately, click Run Now.