Owner`s manual

Refueling:

To refuel the stove, first move the air intake control to full open, let the fire “liven-up” for about one

minute. Open the fuel door about ½” and hold in this position until stove is drafting well. Open the fuel

door and add wood. If the fire or coal bed is almost depleted and a full load of wood is added, it may

be necessary to adjust the air intake control wide open to reestablish a lively fire. The use of start up

air should only be used for a short period of time.

Note:

After refueling, when the wood is burning at a brisk rate, reset the air intake control to the

desired position by moving the air intake control handle all the way closed and then back to the

desired setting.