User manual

4 • Setting the physical scan parameters

ColorQuartet 5.0 Pro

Changing the scan resolution

What it is

ColorQuartet determines the scan resolution for each scan by multiplying Enlargement x Screen

Ruling x Quality Factor and dividing by 100. Normally, the value calculated by ColorQuartet is

appropriate and should not be changed.

• If you do change the value, make sure it does not exceed the maximum resolution of your

scanner (see the specifications in the scanner’s Operator’s Manual).

• NOTE: If you change the Scan Resolution, the

Quality Factor will automatically be regulated.

This keeps the Screen Ruling and Enlargement at the desired settings.

How to set it

In the Size & Resolution section of the Magic Touch window or the Enlargement & Ruling section

of the Scan Setup

window, type in the desired Scan Resolution and press the tab key to confirm.

NOTE: If scan resolution cannot be changed in the Size & Resolution

mode you have chosen, the scan resolution will be shown for informa-

tion only.