User manual

3 • Basic scanning procedures
ColorQuartet 5.0 Pro
48
>>> Related topics:
The
“Scan Setup” window
Negative profile Must be chosen if scanning a color negative.
Choice is remembered.
Correction
history
Can be applied if desired. Choice is remembered.
Autofocus Activate or deactivate (if supported by scanner).
Focus elevation Can be set if supported by scanner. Setting is
remembered.
Aperture (Drum scanners only) Chosen automatically for
each scan, but can be changed if desired.
Descreen Can be applied if necessary (for printed matter).
Unsharp mask-
ing
Can be applied if desired. Choice is remembered.
Tonal range
(Highlight/
Shadow)
Must be set for each image, either automatically,
semi-automatically or manually.
Gradation Can be changed if desired. Settings can be saved
and re-used.
Gray balance Can be changed if desired. Settings can be saved
and re-used.
Saturation Can be changed if desired. Settings can be saved
and re-used.
Selective color Can be applied if desired. Settings can be saved
and re-used.
Burn-out Can be applied if desired. Settings can be saved
and re-used.
Parameter How to use it