User manual

3 • Basic scanning procedures

ColorQuartet 5.0 Pro

Functions in the “Magic Touch” window

Depending on the scan type you activate from the buttons at the top of the window, only the rel-

evant functions are displayed in the

Magic Touch window. Therefore, for any given scan type,

some of the functions described below may not be visible.

Size & Resolution (for CMYK, RGB and gray scale)

1 • Type in the desired enlargement or reduction under Enlargement and press the tab key.

2 • For Scr

een Ruling, choose lines/inch or lines/cm, type in the desired value, and press the tab

key.

3 • Type in the desired Quality F

actor and press the tab key.

4 • The

Scan Resolution field indicates the calculated scan resolution (for information only).

Size & Resolution (for line art)

1 • Type in the desired enlargement or reduction under Enlargement and press the tab key.

2 • Type in the desired Output Resolution and press the tab key.

3 • The

Scan Resolution field indicates the calculated scan resolution (for information only).

Size & Resolution (for web output)

1 • Type in the desired Width and Height in pixels and press the tab key.

Orientation

Click on the buttons to rotate the image clockwise or counterclockwise (in steps of 90°) or to flip

it vertically or horizontally. The large R shows the effect interactively.

Output Profile

• For a CMYK scan, choose the desired CMYK Proﬁle from the menu.

• For an RGB or Web scan, choose the desired RGB Pr

oﬁle from the menu.

• If you are scanning a negative, activate the Negative check box and choose the desired Film

Type from the menu.

For example, if you will be outputting the image on a 600-dpi laser

printer, type in 600.

ColorQuartet will produce as close a format as possible, depending on

the width-to-height ratio of the defined image crop.