User manual

28 • Here’s How! A QuickGuide for ColorQuartet
ColorQuartet 5.0 Pro
261
To geometrically calibrate your ScanMate F10 scanner
1 • Using the registration pins for the Bacher Control 2000 system, place the XY Calibration
Target supplied with the scanner on the mounting plate.
2 • Choose Calibrate Geometry from ColorQuartet’s Calibration menu.
3 • Click on OK to confirm.
IMPORTANT: The target must be kept in good condition. If it becomes
scratched or damaged, the calibration results will be incorrect. Keep
the target in the envelope provided and store it in a safe place. If neces-
sary, a new target can be purchased from your authorized Purup-Esko-
fot dealer.
Geometric calibration will be carried out, and a message will appear to
tell you whether it was successful.