User manual

28 • Here’s How! A QuickGuide for ColorQuartet
ColorQuartet 5.0 Pro
239
In the “Scan Setup” window for your negative scan
1 • Type in a name for the scan (or accept the default name).
2 • Tell ColorQuartet where to put the scan by clicking on the folder icon next to the name field
and using the standard Save As... dialogue that appears.
3 • Choose the desired
File Format ( – see page 55) from the pull-down list.
4 • In the second section of the Scan Setup window, check that Enlargement & Ruling is active.
Type in EITHER the desired Enlargement OR the desired Output Size and press the tab key
to confirm it. (To learn more about options for setting the size and resolution – see
page 61.)
5 • Type in the desired
Screen Ruling ( – see page 64) and press the tab key to confirm it, or
accept the default value.
6 • In the Color Definition section of the window, choose the desired
CMYK Profile (if scanning
to a CMYK file format – see page 90) or RGB Pr
ofile (if scanning to an RGB file format – see
page 83).
7 • Choose the most relevant
Negative Profile ( – see page 78) for the film type. (The effect of
the profile is visible in the feedback window. If necessary, try several different profiles.)
If the image in the feedback window is now okay
1 • Click on Ready to Scan to put the job in the queue.
2 • Choose Do Jobs from the tool bar or Scan menu to start the scanner.
If you want to make additional changes before scanning
1 • In the Color Definition section of the Scan Setup window, set the Negative Profile to Custom.
2 • In the Negative Profile window that appears, set the Profile to Uncalibrated and observe the
effect in the feedback window
3 • If the image is now okay, click on Ready to Scan in the Scan Setup window and choose Do
Jobs from the tool bar or Scan menu to start the scanner.
4 • If you still want to make additional changes before scanning, see “
Adjusting the image and
scanning it” in “Previewing and scanning negatives” – on page 71.