User manual

1 • Starting up and general settings

ColorQuartet 5.0 Pro

Connecting to a scanner or work process

1 • In the Connections window, click on one of the four large icons at the left.

2 • Macintosh: Activate Program Linking to connect to another Macintosh or TCP to connect to

a PC, and click on Connect.

PC: Click on the small computer icon until the text Remote (TCP/IP) appears, and click on

Connect.

3 • Macintosh: Click on the desired entries and OK.

PC: Double-click on the name of the desired program.

4 • Repeat steps 1-3 for any additional programs you want to connect to.

>>> Related topics:

Choosing the next function via the

“Connections” window

• If the Connections window is not open, choose Connections... from the Scan

menu.

• Macintosh: If the Connections... command is not visible, choose Prefer-

ences... from ColorQuartet’s Edit menu and check that Full Menus is acti-

vated in the Features tab.

A window will appear that displays the CQscan and CQtiff programs

that are running.

(PC, NOTE: if Local (RPC) is shown instead of Remote (TCP/IP), Color-

Quartet will automatically connect to the scanner that is attached

directly to your computer.)

You will return to the Connections window, where the icon at the left

now shows the chosen input type.

IMPORTANT (PC): The small computer icon is a connect/disconnect

toggle. Before using it, check which icon you have activated in the left

side of the window. If it is one to which you already have connected,

you will disconnect from that program.