User manual

28 • Here’s How! A QuickGuide for ColorQuartet
ColorQuartet 5.0 Pro
228
To scan automatically with Magic Touch
If the Magic Touch window did not automatically appear when you started up ColorQuartet,
choose Setup... from the Magic Touch menu or click on the Change Magic Touch Settings icon in
the tool bar.
To mount originals in the scanner
• You can autoscan one or more images at a time, as long as the type of scan is the same for all
the images in the batch.
• Place the images directly on the glass plate or drum or mount them in a template.
To set up and execute the scans
1 • For opaque originals, click on the Reflection icon or choose Reflection from the Magic
Touch menu.
For transparent originals, click on the Transmission icon or choose Transmission from the
Magic Touch menu.
2 • Click on the icon for the desired kind of output: CMYK, RGB, Gray scale, Line art or Web or
choose it from the Magic Touch menu.
3 • The dialogue will display the functions
that are relevant for the chosen combination of
original and output ( – see page 40). Set each function as desired, pressing the tab key after
each entry to confirm it.
• Place transparent originals (slides, negatives) face up.
• On a flatbed scanner, place opaque originals (photographs, printed matter)
face down and cover them with a reflection mat (available as an accessory
from your Purup-Eskofot dealer) or the plain gray side of a reflection tem-
plate. On a drum scanner, place opaque originals face up.
• On a flatbed scanner, place as many originals as possible down the center of
the scanner bed to ensure the highest scan resolution and productivity.
• Place the tops of the images toward the left-hand end of the scanner bed or
drum.
• If you are not using a template, make sure the images are lined up as parallel
to the edges of the scanner bed or the axis of the drum as possible.
Magic Touch remembers the settings you choose for each of the ten
possible scan types, and uses them for that scan type until you change
them..