User manual

26 • IT8 calibration & device-independent color
ColorQuartet 5.0 Pro
215
Restoring the default IT8 calibration
Only one IT8 calibration for tranmission and one for reflection can exist in your system at any
given time. If you carry out the IT8 calibration procedure, the new calibration will overwrite the
old one.
To remove an IT8 calibration and return to ColorQuartet’s default calibration, do the following:
1 • In the folder on your hard disk where ColorQuartet is stored, find the folder called cqsc-
drum (for drum scanners) or cqscflat (for flatbed scanners).
2 • From this folder, find and remove the file(s) called:
3 • Then find the original it8trsml.icc and/or it8rfsml.icc file on the diskette supplied with your
scanner and copy it into the folder.
>>> Related topics:
C
olorQuartet and device-independent color
Performing IT8 calibration
Using an IT8 calibration from another source
it8trsml.icc (transmission calibration).
it8rfsml.icc (reflection calibration).