User manual

16 • MouseFree • Practical examples
ColorQuartet 5.0 Pro
157
MouseFree Tutorial 3 • Auto-scanning with multiple templates of same type
Since extra templates can be purchased, you may wish to work with more than one template of
the same type. In this case, you should give each individual template a unique code number.
The ScanFlow System recognizes the code of each template. This is what makes it possible to
preview-scan a batch, remove the template from the scanner, and later place it back in the scan-
ner to do the actual scanning.
The type code and template number can be exploited in the ScanFlow System to pre-assign dif-
ferent crop layouts and/or scan setups to various templates.
To assign an individual number to a template, use the left-hand row of perforated circles at the
top of the template. Remove the circles that add up to the desired number. A few examples:
• for number 1, remove the 1 circle.
• for number 4, remove the 1 and 3 circles.
• for number 16, remove the 1, 5, and 10 circles.
Make sure that each template is given a different, unique number!
To set up a crop layout for one or more templates (with or without an associated scan setup):
1 • From ColorQuartet’s ScanFlow menu, choose ScanFlow Control. In the window that
appears, set the ScanFlow menu to Off.
2 • Take a standard 24 x 36 mm template and assign a unique number to it as described above.
3 • Mount a few images in the template and place it in the scanner. Make a preview scan of the
whole template.
4 • If desired, create a standard scan setup for the template as described in M
ouseFree Tutorial
2.
5 • From ColorQuartet’s ScanFlow menu, choose Crop Layout Editor.
6 • In the window that appears, choose the relevant standard Crop Layout (Template 24 x 36),
activate the Preferred Scan Setup check box, and choose the desired scan setup.
7 • Activate the Template Type is check box, activate the Template/Drum No. is check box and
type in the individual number of the template.
8 • Click on Save As... and give the crop layout a name that will be easy to recognize later (for
example: Template 24 x 36 - n, where n is the unique number of the template). Be sure to
save the file into the Crop Layouts folder in the ColorQuartet X.X folder.
9 • In the ScanFlow Control window, set ScanFlow to MouseFree.