User manual

15 • ScanFlow & MouseFree • Procedures
ColorQuartet 5.0 Pro
144
8 • If desired, make the crop areas smaller by changing the Inset for all Crops values for w
(width) and h (height).
9 • If you want to associate a standard scan setup with the crop layout, activate the Preferred
Scan Setup check box and choose a previously saved scan setup from the menu.
10 • If you want the crop layout and scan setup to be valid for every template of a given type, acti-
vate the Use Crop Layout: When the Template Type is check box.
11 • If you want the crop layout and scan setup to be valid for a specific, numbered template or
drum, activate the Use Crop Layout: When Template/Drum No. is check box and type in the
relevant number.
12 • If you only want the crop layout to be used when you specifically request it from the Crop
Layout window, activate the Use Crop Layout: When shown in this window check box.
13 • When finished, save the revised crop layout to disk.
>>> Related topics:
A
utomatic cropping and scan setup
• The w and h values for Size correspond to the defined size of the cutouts in
the template or marked fields on the drum. The effective scan area for each image
can be reduced by using Inset values. The w value is applied to both the
right- and left-hand sides of the crop, and the h value to both the top and
bottom of the crop.
• To save a standard scan setup, make a pr
eview scan, crop a representative
image, and open the Scan Setup
window. Set the parameters as desired and
save the setup to disk by choosing Save Scan Setup from ColorQuartet’s
ScanFlow menu.
• If no special scan setup is assigned to the crop layout, ColorQuartet will use
the parameters that are currently active in the Scan Setup window.
This is, for example, necessary if you define two different crop layouts
for the exact same combination of conditions.
• To overwrite the existing file, click on the Save button.
• To assign different crop layouts to different, numbered templates or drums,
use the Save As... button to save the crop layouts under different names.