User manual

1 • Starting up and general settings

ColorQuartet 5.0 Pro

Elapsed time

Status

Current Template or Current Drum (not shown in CQtiff window)

Pause / Resume (toggle)

Abort

Cover open

For the current scanning job, shows how much time has passed in min-

utes and seconds.

Displays an “event log” for the CQscan program module. Click on the

Status field to view up to 20 of the most recent messages.

Displays the number and type of the currently mounted template or

the number of the currently mounted drum, depending on which type

of scanner is connected to CQscan. For a template, the number con-

sists of the individual template’s number, a hyphen, and then a code

for the template type (NOTE that when magnetic templates are used,

only the original holder nearest the left-hand end of the scanner bed is

registered).

Click below for a list of the codes for your scanner:

ScanM

ate F6/F8/F8+ template types

ScanMate F10 template types

This button is visible only when a drum scanner is in use; the same

effect is obtained on ScanMate flatbed scanners by physically opening

or closing the lid of the scanner.

Click on Pause to stop the scanner. The current job will be aborted and

put back into the queue. Click on Resume to restart the scanner.

To abort the job that is currently being scanned and remove it from the

queue, click on Abort.

If the cover of the scanner is open, a text and icon will appear in the

bottom right-hand corner of the CQscan window to inform you. Nor-

mally, the cover should be kept closed during scanning, but reflection

scans – for example, of books and other bulky objects – can be done

with the cover open if necessary.