User manual

15 • ScanFlow & MouseFree • Procedures
ColorQuartet 5.0 Pro
138
ScanFlow System • Cropping and setting up images from a preview
When the ScanFlow System is activated, you can access stored previews from any computer in
the network on which you have installed the ColorQuartet user interface.
1 • Open the Available Previews window by choosing Available Previews from ColorQuartet’s
ScanFlow menu.
2 • Double-click on the name of the desired preview.
3 • Draw the crop frame for the first image, and double-click inside the crop area.
4 • Establish a file name, file format, size and resolution, etc., and apply any desired color tools
to the image.
5 • When finished, click on the Ready to Scan button in the Scan Setup window.
6 • Repeat steps 3, 4 and 5 for each image on the mounting plate or drum.
7 • When finished, choose Do Jobs from the Scan menu.
• The Preview window will open, and all the normal ColorQuartet functions
will be available.
• The previews that are available are the ones stored in the auto pr
eviews
folder that you set up earlier.
• The S
can Setup window for that crop will appear.
• You can also crop the whole batch automatically by choosing Apply Crop
Layout from ColorQuartet’s ScanFlow menu and choosing the desired layout
from the standard dialogue that appears – provided that a suitable cr
op lay-
out has previously been saved to disk.
You can also apply a standard scan setup to the whole batch by choos-
ing Set Up All Crops from ColorQuartet’s ScanFlow menu. The setup
used will be the one associated with the cr
op layout you applied. If no
special setup has been attached to the layout, or if no crop layout was
applied, the values currently active in the Scan Setup window will be
used.
The prepared images will appear in the CQscan
window’s Job Queue.
Once this has been done, if the template with these images is placed in
the scanner, the images will automatically be scanned.