User manual

2.4 Model Generation 35
Figure 2.27: Datum alignment panel.
divided in 2 groups, one of the fixed planes, containing the system planes and one for the planes built on the
mesh one has to align. The alignment is defined with the button create pair which associates a fixed plan
with a moving one: a list containing one to three pairs of planes, each one with a reference plane (fixed) and
a moving plane of the mesh, is created; such list orders with decreasing priorities the alignment bindings.
The section Alignment displays the list of the pairs, ordered with decreasing priority: once selected a pair,
the buttons on the left allow to erase it or to modify its priority. Each variation of the alignment given by
modifications to the pairs or the list is instantly applied.