User manual

28 Chapter 2. Using IDEA
distance is appropriate;
• Projector’s focus regulation (optional)) : if the black vertical line appears not to be sharp enough (as
shown in Figure 2.17.b) set the projector’s focus to obtain a satisfying definition (ref. Figure 2.17.c).
It is now possible to scan the surface of interest through the button 3D Scan . At the end of the scan the
acquired data is displayed in the 3d view window as in Figure 2.18.
Figure 2.18: Result of an acquisition procedure.
2.2.2 Turn Table acquisition mode
The availability of the turn table allows to perform acquisitions, object positioning in front of the scanner
and alignments in a completely automatic manner. Upon opening the connection with the scanner with the
button Open 3D Scanner , the IDEA interface will appear as in Figure 2.19.
Figure 2.19: Acquisition interface with the Turn Table.
The presence of the turn table adds new options to the combo-box of the scan panel (Figure 2.20):
• 3D Scan: allows to perform single 3D scans orienting the object by means of the turn table;