Service manual

7020
25 mode DIPSW15-6=1; Displays message. Stops machine.
10. Incorrect size in Frame Erasure mode
(Current) When Frame Erasure in Applications is used, the image is copied in an incorrect position.
(New) Corrected.
11. Image lack in Numbering function.
(Current) When "R-Bottom" is set for stamp position in Specifications for Stamp and enlargement
copy is made, the number becomes missing.
(New) Corrected
12. Abnormal denominator in numbering for Sheet/Cover Insertion mode.
(Current) In Sheet/Cover Insertion + Print function page mode, the number of inserted pages is not
added to the denominator.
Example: When 5 originals and 3 sheets of inserted paper are used, the number will be 1/5, 2/5,
---- 8/5.
(New) Corrected.
13. Initialization of charging grid adjustment value at drum replacement
(Current) When drum count is cleared (at drum replacement), charging grid adjustment value is not
reset to factory setting.
(New) When drum count is cleared (at drum replacement), charging grid adjustment value is reset
to factory setting.
14. E89-4.
(Current) When you press "Start" while holding the original in ADF mode and then press "Stop",
E89-4 occurs in about 30 seconds.
(New) Corrected.
[PRINTER FUNCTION]
1. In Staple mode for printer, J72-2 occurs
(Current) In printer staple mode setting, when the machine stops at output due to paper running
out, if the printing is continued after loading paper and pressing paper exit button, J72-2 occurs.
(New) Corrected
[COPIER AND PRINTER FUNCTION]
1. Change of output base for non-standard sized original from bypass tray
(Current) When copying non-standard sized original in ADF mode or printing non-standard
document, the image is positioned at the edge of the paper.
(New) When copying non-standard sized original in ADF mode or printing non-standard document,
the image is positioned in the center of the paper.
[FAX FUNCTION]
1. Abnormal image when Automatic rotation transmission (B5R) is turned ON.
(Current) When Automatic rotation transmission (B5R) is turned ON in Fax Service menu,
sandstorm like image occurs.
(New) Corrected
2. Screen switching after scanning original.
(Current) After scanning of the originals is completed when transmitting fax, the basic screen
appears as if the transmission was not completed. (Although the transmission is completed
successfully.)
(New) Displayed screen after scanning can be selected from function parameter key.
Note: Input address using Function Parameter Key in Fax Service mode:
0B005B=1: Displays "Transmitting" screen after scanning.
0B005B=0: Displays Basic screen after scanning. (Factory setting)
3. Machine hangs up when input "P" in name input screen
(Current) If "P" is pressed in the screen for inputting a name, the machine hangs up.
(New) Corrected.
4. Possible to print on B5 size paper when receiving A5 size data.
(Current) When receiving A5 size data, the data is printed on A4, A3 or B4 size paper. Paper size
can be selected in the paper size selection mode. When automatic selection is used, the paper
size closest to the receiving image size is selected.
(New) When receiving A5 size data and no A4 size paper is loaded, the data is printed on B5 size
paper. When no B5 size paper is loaded, the same operation as the current will be applied.
67
Copyright 2005, Konica Minolta Business Solutions U.S.A., Inc.
May 2005